100BASE-T1 Ethernet PHY
MegaChips is the only Japanese manufacturer to have developed a 100BASE-T1 compliant 100Mbps Ethernet PHY. This is ideal for the products that require space saving and reduced wiring in robot and industrial devices.
- 100BASE-T1 compliant Ethernet PHY
100Mbps full-duplex communication with a pair of UTP cables. High-speed communication is available with a lightweight and lower-cost wire harness.
- Reduced wiring/space saving
Unlike 100BASE-TX, 1-Pair (no shield required) wiring and an external transformer is not required, thus achieving a reduction of wires and the saving of space.
- Compliant with automotive quality standards AEC-Q100
We guarantee quality in conformity with automotive quality standards.
|Specification||100BASE-T1 compliant Ethernet PHY|
|Package||QFN 36-pin (6×6mm,Wettable Flank)|
|Operating temperature (Ta)||-40℃ ～ +125℃|
|Number of ports||1 port|
|MAC I/F||MII, RMII, RGMII|
|Power supply||3.3V single
(Either 3.3V, 2.5V or 1.8V is available for MAC I/F power supply)
|Power saving||Low power consumption sleep mode：10uA(standby)
Supports external power control (INH)
|ESD||HBM: 6KV (MDI pin), 2KV (other)
MM: 200V, CDM: 500V
|Third-party certification||UNH/FTZ/C&S: Certified|
|Diagnosis||MDIO timeout detection